N1x4 NanoSpeed Optical Switch
The N1x4 optical switch is connected to the optical path by connecting or blocking the optical signal. the switch has non-mechanical configurations and activated via an electrical control signal. Products are widely used in aerospace and military equipment.
Features
Solid-state high speed
High Stability, High Reliability
Epoxy-free on Optical Path
Applications
Aerospace equipment
Sensing system
System monitoring
Specifications
Drawing
Functional Diagram
other information
Parameters | Unit | Specifications | |
Wavelength Range 1 | nm | 1260 ~ 1360 | 1500 ~ 1600 |
Test Wavelength | nm | 1310 | 1550 |
Insertion Loss 2, 3 | dB | ≤ 1.5 | |
TDL | dB | ≤ 0.30 | |
PDL | dB | ≤ 0.20 | |
Return Loss | dB | ≥ 50 | |
Crosstalk | dB | ≥ 20 | |
Repeatability | dB | ≤ ±0.01 | |
Switching Time 4 | ns | ≤ 300 | |
Durability | Cycles | ≥10 Billions | |
Switch Type | NA | Non-Latching | |
Maximum Optical Power | mW | 500 | |
Operating Temperature | °C | -5 ~ +70 | |
Storage Temperature | °C | -40 ~ +85 | |
Dimension | mm | (L)32.0×(W)15.0×(H)7.5 ±0.2 | |
Note: 1, Customizable. 2, Tested at room temperature and SOP. 3, Tested with no connectors, with 2 connectors to plus 0.2dB. 4, Tested with the standard driver, with a high speed driver can theoretically reach lower to ≤ 30ns. | |||
Electrical Drive
Type | Status | Optical Route | Electric Drive | |||||
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | |||
N1x4 | I | Com－P1 | -- | -- | -- | -- | V+ | 0 |
II | Com－P2 | V+ | 0 | V+ | 0 | V+ | 0 | |
III | Com－P3 | -- | -- | V+ | 0 | V+ | 0 | |
IV | Com－P4 | V+ | 0 | V+ | 0 | -- | -- | |
Ordering Information
Port | Switch Type | Fiber Type | Wavelength | Tube Type | Fiber Length | Connector | |
ES | N1x2：1x2 N1x4：1x4 N2x2：2x2 | B： Bidirectional | SM： SM，9/125 X： Others | 1310： 1310nm 1550： 1550nm X： Others | 250： 250um 900： 900um X： Others | 05： 0.5m±5cm 10： 1.0m±5cm X： Others | OO：None FC：FC/PC FA：FC/APC SC：SC/PC SA：SC/APC LC：LC/PC X：Others |